3043-48210

HYWAY

STIHL: 044, MS440

Replaces OEM:
11280201227, 11280201201

NiSiC (Nikasil ®) plated In case a 10mm pin is needed, order also piston3043-50449

Ø pin: 12 mm
Thickness segment: 1,2 mm
Ø: 50 mm


Sales price:
Add to favorites:
Unit q-ty:
1



Related Articles

  • Piston ring
    3042-05248

    Models: STIHL 044, TS410, TS420

    Ø piston: 50 mm / Thickness segment: 1,20 & 1,20 mm

    2
  • Complete piston
    3043-50239

    Models: STIHL 044, MS440

    Ø pin: 12 mm / Content: A / Thickness segment: 1,2 mm / Ø piston: 50 mm

    1
  • Bearing for piston pin
    4235-12155

    Models: HUSQVARNA 61, 268, 365, 357, 359, STIHL 044, 046

    H: 15 mm / Ø outside: 15 mm / Ø inside: 12 mm

    1
  • Complete piston
    3043-50449

    Models: STIHL 044, 044 - 10mm pin

    Ø pin: 10 mm / Content: A / Thickness segment: 1,2 mm / Ø piston: 50 mm

    1
  • Complete piston
    4243-36239

    Models: STIHL 044

    Original Numbers: AIP

    Ø pin: 10 mm / Thickness segment: 1,5 mm / Ø piston: 50 mm

    1
  • Gasket set
    3049-35154

    Models: STIHL 044

    1
  • Vibration damper
    2075-20127

    Models: STIHL 044

    1
  • Complete piston
    3043-50449

    Models: STIHL 044, 044 - 10mm pin

    Ø pin: 10 mm / Content: A / Thickness segment: 1,2 mm / Ø piston: 50 mm

    1
  • Cylinder
    9043-48210

    Models: STIHL 044

    Original Numbers: METEOR

    Thickness segment: 1,2 mm / Ø: 50 mm / Ø pin: 12 mm

    1
  • Handle for chainsaw
    3063-07790

    Models: STIHL 044

    1
  • Crankshaft
    3044-48539

    Models: STIHL MS440, 044 (> n° X29583701), 044 (after serial X29583701) 15mm pin hole

    Ø pin: 12 mm

    1
  • Bearing
    3035-06631

    Models: STIHL 034, 036, 044, MS360, MS440

    H: 13 mm / RPM: (C4) 19000 / Ø outside: 35 mm / Ø inside: 15 mm

    1
  • Complete piston
    4243-36823

    Models: STIHL 044, MS440

    Original Numbers: AIP

    Ø pin: 12 mm / Content: A / Thickness segment: 1,5 mm / Ø piston: 50 mm

    1
  • Starter pulley
    3455-60237

    Models: STIHL 036, 044

    Ø hole: 10,5 mm / Ø outside: 67,9 mm

    1
  • Piston ring
    3042-05248

    Models: STIHL 044, TS410, TS420

    Ø piston: 50 mm / Thickness segment: 1,20 & 1,20 mm

    2
  • Pre-filter
    3008-01263

    Models: STIHL 044, MS440, 046, MS460, MS660, 066, MS441

    1
  • Sprocket cover
    3063-07555

    Models: STIHL 044, 046, 064, 066, MS440, MS460, MS640, MS660, 038

    1
  • Sprocket
    086-11

    Models: STIHL 046, 044, MS440, MS441, MS460

    Original Numbers: ARCHER

    Teeth: 7 / H: 28,7 / Pitch: 3/8” / Ø inner side clock: 76,1 / Ø inside: C=15,9

    1
  • Sprocket
    086-A7

    Models: STIHL 046, 044, MS440, MS441, MS460

    Original Numbers: ARCHER

    Teeth: 7 / H: 28,7 / Pitch: 3/8” / Ø inner side clock: 76,1 / Ø inside: C=15,9

    1
  • Transmission Clutch Lever Spring
    2037-50114

    Models: STIHL 034, MS341, 036, MS360, MS360C, MS361, MS361C, 044, MS440, 046, MS460, TS400

    1
  • Bearings for sprockets
    5272-04611

    Models: STIHL MS360, 036, 044, 046, 064, 066

    H: 12 mm / Ø inside: 10 mm / Ø outside: 16 mm

    1
  • Clutch
    3037-07066

    Models: STIHL 044, 046, MS341, MS361, MS440, MS460

    1
  • Air filter
    3008-00263

    Models: STIHL 044, MS440, 046, MS460, MS660, 066, MS441, 088, MS441C, MS650, MS780, MS880

    L: 106 mm / W: 80 mm / H: 43 mm

    1
  • Sprocket cover
    3063-07534

    Models: STIHL 024, 026, 028, 029, 034, 036, 039, 044, 046, 064, 066, MS240, MS260, MS380

    1
  • Spark plug terminal
    3014-02573

    Models: STIHL 026, 036, 038, 044, 046, 066, FS350, FS400, FS450, BR120, FT250, TS400, 009, 010, 011, 024, 084, 088, MS192T, MS192TC, MS210, MS210C, MS360, MS361, MS361C, MS460, MS650, MS660, MS880, TS800

    1
  • Starter pawl
    3455-60203

    Models: STIHL 009, 010, 011, 012, 017, 018, 019, 020, 021, 023, 024, 025, 026, 028, 029, 034, 036, 044 (MS models), 044, MS260

    1
  • Ignition coil
    2111-0SV34

    Models: STIHL 024, 026, 028, 029, 034, 036, 038, 039, 044, 048, MS240, MS260, MS290, MS310, MS390, MS340, MS360, MS36C, MS440, FS360, FS420

    Original Numbers: VEC

    1
  • Ignition coil
    0111-06929

    Models: STIHL 024, 026, 028, 029, 034, 036, 038, 039, 044, 048, MS240, MS260, MS290, MS310, MS390, MS340, MS360, MS36C, MS440, FS360, FS420, MS36

    1
  • Starter spring
    3056-16210

    Models: STIHL 017, 018, 019, 020, 021, 023, 025, 029, 034, 036, 039, 044, 046, 066, MS170, MS180, MS190T, MS191T, MS200, MS200T, MS290, MS310, MS340, MS360, MS390, MS440, MS460, MS660

    W: 4,8 mm / Winding: 11

    1
  • LAMINATED SPROCKET NOSE - GUIDE BAR
    ST18-26366-TC

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: ITAL

    Cutting length: 45 cm / Gauge: 1,6 / Mount type: 42 / Pitch: 3/8” / Links: 66 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - STANDARD GUIDE BAR
    ST2L-3Q45-A

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 45 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: 3/8” / Links: 66 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - LIGHT GUIDE BAR
    ST2M-3Q40-A

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 40 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: 3/8” / Links: 60 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - LIGHT GUIDE BAR
    ST2M-3Q36-A

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Gauge: 1.6 mm / Cutting length: 36 cm / Pitch: 3/8" / Links: 56 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID HARD NOSE - STANDARD GUIDE BAR
    ST2A-3D63

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 63 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: 3/8” / Links: 84 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3Q45-A

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 45 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: 3/8” / Links: 66 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - GUIDE BAR
    ST16-26360-TC

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: ITAL

    Cutting length: 40 cm / Gauge: 1,6 / Mount type: 42 / Pitch: 3/8” / Links: 60 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - GUIDE BAR
    ST15-26356-TC

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: ITAL

    Cutting length: 38 cm / Gauge: 1,6 / Pitch: 3/8" / Links: 56 / Mount type: 42 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - GUIDE BAR
    ST20-26372-TC

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: ITAL

    Cutting length: 50 cm / Gauge: 1,6 / Mount type: 42 / Pitch: 3/8” / Links: 72 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID HARD NOSE - STANDARD GUIDE BAR
    ST2A-3D35

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 35 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: 3/8” / Links: 55 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID HARD NOSE - STANDARD GUIDE BAR
    ST2A-3D45-G

    Models: STIHL 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 45 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: 3/8” / Links: 66 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - GUIDE BAR
    ST16-36367-TC

    Models: STIHL 024, MS240, 026, MS260, MS270, 028, MS280, 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: ITAL

    Cutting length: 40 cm / Gauge: 1,6 / Mount type: 42 / Pitch: .325” / Links: 67 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID HARD NOSE - STANDARD GUIDE BAR
    ST2A-3D40

    Models: STIHL 024, MS240, 026, MS260, MS270, 028, MS280, 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 40 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: 3/8” / Links: 60 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3Q40-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 40 cm / Pitch: 3/8" / Links: 60 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - STANDARD GUIDE BAR
    ST2L-3J40-A

    Models: STIHL 024, MS240, 026, MS260, MS270, 028, MS280, 029, 030, 031, 032, 034, 036, 038, 039, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220, MSE200, MSE220, MS290, MS310, MS390, MS340, MS341, MS360, MS361, MS440, MS460, MS640, MS650, MS660

    Original Numbers: SUGIHARA

    Cutting length: 40 cm / Gauge: 1,6 / Mount type: ST2 / Pitch: .325” / Links: 67 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • Oil pump gear
    3077-35167

    Models: STIHL MS460, MS044, MS046, 044, 046

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3Q104-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 104 cm / Pitch: 3/8" / Links: 132 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - LIGHT GUIDE BAR
    ST2U-3J37-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, MS270C, MS280, 280C, MS290, 310, 360, MS361, 390, 440, MS460, 650, 660

    Original Numbers: SUGIHARA

    Cutting length: 37 cm / Gauge: 1,6 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - LIGHT GUIDE BAR
    ST2U-3Q45-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, MS270C, MS280, 280C, MS290, 310, 360, MS361, 390, 440, MS460, 650, 660

    Original Numbers: SUGIHARA

    Cutting length: 45 cm / Gauge: 1,6 / Pitch: 3/8" / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3Q36-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 36 cm / Pitch: 3/8" / Links: 56 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3Q40-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 40 cm / Pitch: 3/8" / Links: 60 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3Q90-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 90 cm / Pitch: 3/8" / Links: 114 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - LIGHT GUIDE BAR
    ST2U-3J40-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 40 cm / Pitch: .325" / Links: 67 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - LIGHT GUIDE BAR
    ST2U-3Q50-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 50 cm / Pitch: 3/8" / Links: 72 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - LIGHT GUIDE BAR
    ST2U-3Q70-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 70 cm / Pitch: 3/8" / Links: 92 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3J50-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 50 / Pitch: .325" / Links: 81 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • LAMINATED SPROCKET NOSE - STANDARD CARVING BAR
    ST2L-3Q40-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 40 cm / Pitch: 3/8" / Links: 60 / Type: ST2 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - LIGHT GUIDE BAR
    ST2U-3J45-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 45 cm / Pitch: .325" / Links: 74 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • TRIMAX PROFESSIONAL LAMINATED GUIDE BAR
    16B3-TL-SN

    Models: STIHL 024, 026, 028, 028S, 029, 030, 031, 032, 034, 036, 036 PRO, 038, 039, FARM BOSS, 040, 041, 042, 044, 045, 046, 048, 056, 064, 066, "MS270, MS270C, MS270CQS, MS271, MS280, MS280C, MS280CQS, MS290, MS291, MS310, MS311, MS341, MS360, MS360 PRO, MS360QS, MS361, MS361C, MS362, MS381

    Original Numbers: ARCHER

    Gauge: .063" = 1,6 mm / Cutting length: 16" = 40 cm / Pitch: .325� / Links: 67 / Mount type: SN / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3J37-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 37 cm / Pitch: .325" / Links: 62 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - LIGHT GUIDE BAR
    ST2U-3Q40-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 40 cm / Pitch: 3/8" / Links: 60 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • SOLID REPLACEABLE SPROCKET - STANDARD GUIDE BAR
    ST2T-3J45-A

    Models: STIHL 012, 024, 026, 028, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044C, 045, 046C, 048, 056, 064, 066, MS240, 260, 261, 270C, 280, C290, MS310, 360, 361, 390, 440, 460, 650, 660

    Original Numbers: SUGIHARA

    Gauge: 1,6 mm / Cutting length: 45 cm / Pitch: .325" / Links: 74 / Mount type: ST2 / OREGON mount: D025 / CANNON mount: S1 / ARCHER mount: SN / SUGIHARA mount: ST2 / ITAL mount: QR / STIHL mount: 3003

    1
  • Spark plugs
    BPMR7A

    Models: AUTOLITE 2976, 2974, BOSCH WSR5F, WSR6F, CHAMPION RCJ6Y, RCJ7Y, MAKITA PD491 RBL 500 DBC 3300/10, DBC 4000/10 DBC 4500/10 RBC 420E RBC 421L DCS 34 DCS 430 DCS 520 DCS 3400 DCS 3400TH DCS 3410 DCS 3410TH DCS 4300i DCS 4600S DCS 5200i DCS 6000i DCS 6400 DCS 6401 DCS 6800i DCS 7300 DCS 7301 DCS 7900 DCS 7901 DCS 9000/10 DPC6400, DPC6401, DPC6200 DPC6410 DPC7000 DPC7301 DPC7311 DPC8112 DPC9500 RBC2110 RST210, STIHL BT45, BT120C, BT121 BG45, BG46, BR45, BR46 BG55, BG65, BG8H, SH55, SH85 BG75, BR106, BR320/L, BR380, BR400, BR420, SR320, SR400, SR420 BR340/L, BR350, BR430, SR340, SR430, SR450 FC55, FC75, FC85 FS38, FS45, FS46, FS55 FS48, FS52, FS62, FS66, FS75, FS80, FS81, FS85, FS86 FS72, FS74, FS76 FS106, FS120, FS150, FS200, FS250, FS410 FS350, FS360, FS420 FS400, FR450, FS450/K, FS480, FS500, FS550 FS490 C-EM FS560 C-EM KW85 KW85 009 L, 012, 017, 018, 019 T, 020, 020 T, 021, 023, 024, 026, 028, 029 S 036, 038, 039, 044, 046, 056, 066, 084, 088, 090 MS170, MS180, MS191 T, MS192T, MS200, MS200 T, MS210, MS230, MS240, MS250, MS250 C, MS260, MS270, MS280, MS290 MS261 MS310, MS311, MS341, MS360, MS361, MS362, MS390, MS391, MS440, MS441, MS460/R, MS650, MS660, MS880, TS350, TS400, TS410, TS420, TS460, TS510, TS700, TS760, TS800, KM55, KM85, SP80, SP85, SP200, FH75, HL45, HL75, HS45, HS75, HS80, HS85, MM55 MultiSystem, HT70, HT75, HT250

    Original Numbers: NGK

    Type: RCJ6Y, RCJ7Y

    10
  • Spark plugs
    RCJ8Y

    Original Numbers: CHAMPION

    Type: BPMR6A

    4

Replacement articles

  • Cylinder
    9043-48210

    Models: STIHL 044

    Original Numbers: METEOR

    Thickness segment: 1,2 mm / Ø: 50 mm / Ø pin: 12 mm

    1

  • 3043-48044